manufacturing process Step 1

How Miyuki beads are made?

Miyuki Seed Beads and Delica are made by mixing the raw materials SiO2, NaCO3, and CaCO3 with any base-coloring ingredients and placing them in a 1400C furnace to make the melted glass. Miyuki Delica are the highest quality seed beads in production today.
Swarovski comes in a myriad of shapes, colors, and coatings and is consistent with them. Crafters often use Miyuki between beads because they are high quality and add a wee bit of color and sparkle and don’t tarnish like the tiny sterling silver beads that can’t be reached to polish.

I want to create quality pieces for you. I could definitely make them cheaper, but then they’d look, well, cheap. A lot of the inexpensive jewelry you find does use Czech and Chinese crystals. I want my designs to have a quality look to them and so I choose to work with the highest quality bling available.

Below is the manufacturing process of Miyuki seed beads from raw material to products

1.ガラスを作る~原料調合、溶解~

硅砂、ソーダ灰、石灰等のガラス原料に着色原料を混ぜて調合し、ガラスの溶融炉で約1400℃位の温度で加熱溶解し、ガラスの生地を作ります。

Step 1

2.ガラス管を作る~管引~

溶けたガラスを製管用の坩堝に移し、中央に空気を吹き込みながら管引き機で引っ張り、ガラスの管を作ります。
タラシ坩堝の底の穴の形によって、丸、三角、四角などガラス管の形状が決まります。

Step 2

3.ガラス管を短く切る~切断~

細長いガラス管を高速で回転する専用切断機で、ほぼ同じ長さに切断します。

Step 3

4.切断品を焼いて形を丸くする~元焼~

切断品を木炭の粉と混ぜて約700℃位の温度で加熱し、切断品の角を溶かして丸いビーズを作ります。
(写真:ガラスが高温で焼けている様子)

Step 4

5.洗浄~元焼、洗浄~

木炭の粉を洗い落とします。

Step 5

6.ビーズの表面のつや出しをする~仕上げ~

洗浄されたビーズは表面がスリガラス状になっています。表面をなめらかにすることで、きれいなツヤのあるビーズに仕上げます。 表面加工しないビーズはこの段階で製品として出荷されます。

Step 6

7.ビーズの表面に加工を施す~加工~

仕上げされたビーズの表面や穴の中に、銀メッキ、着色、焼付け、ラスター、レインボー等の二次加工を行い、様々な色調や光彩をもったビーズを作ります。

Step 7

8.洗浄~仕上げ洗浄~

加工中の汚れや加工後のビーズをよく洗浄、乾燥して最終製品とします。

Step 8

9.製品を包装し出荷する~出荷~

製品は欧米、アジアを中心に世界各地に輸出されます。
また国内では、主に手芸店やビーズショップで販売されたり、刺繍や装飾材料として服飾、アクセサリー業界に出荷されます。

Step 9

How Miyuki Glass Seed Beads Are Made? – English version

Step 1: Raw materials and recycled glass of the same color are mixed and melted in the furnaces. The Miyuki factory has both automatic and manual furnaces operating 24 hours per day. They are on the 2nd floor.

Step 2: When ready, molten glass from the furnaces falls through a hole. The shape of the hole determines the shape of the glass tubes. Compressed air hitting the center of the glass column turns it into a hollow tube of glass.

Step 3: After dropping to the first floor, the vertical tube of falling glass passes under a thick chunk of wood and turns at a right angle to become horizontal. Imagine a vertical length of rope passing under a pulley and then being pulled sideways. The scene in the glass factory is much more dramatic, however. For starters, the glass “rope” is still extremely hot so it is slowly burning its way through the smoking piece of wood. In addition, the tube of glass is actually being pulled over a series of metal troughs by a machine that not only pulls the glass but also cuts it into one meter lengths. The speed of the pulling determines the diameter of the glass tubes. A faster pull makes thinner tubes; a slower speed makes them thicker.

Step 4: The cooled tubes are sorted to make sure that they are the correct diameter for the size beads being produced. Any tubes which are not the correct size will be recycled and remelted to make new glass.

Step 5: The tubes are cut into beads.

As the cutting room is not open to any outsiders, I can’t offer further information. I did learn that one Delica cutting machine can only cut 4-5 kgs per day, which is one reason for their high cost. (And contrary to some rumors, Miyuki cannot run the Delica cutting machines faster to keep up with increased demand, with an accompanying decline in quality. Instead, high demand just leads to longer waits for production). Delicas are not cut by lasers, by the way, another occasional rumor.

Step 6: Cut beads are mixed with carbon black and reheated to make them round. Delicas are only slightly heated; round beads are heated more.

Step 7: The beads are washed. Miyuki has its own on-site water treatment equipment.

Step 8: The beads are heated again to give them a surface polish. Basic opaque and transparent beads are now finished and ready to pack.

Step 9: Fancier beads – AB colors, silver and color-lined, metallic, etc. – are based on the basic opaque and transparent colors.

There are several different locations in the factory where dyes and other coatings are applied. Some beads require multiple treatments which directly influence their final cost. After dyeing or color-lining beads, Miyuki reheats them again to “set” the colors, a step skipped by some bead companies to reduce costs.

4 thoughts on “How Miyuki beads are made?”

  1. Wow, is there an English version to each photo? I’d love to know what’s going on in each photo. I’ve been told the Miyuki beads are of very high quality. It would be nice to know more about how they are made so I can give details on the production of and why/how they make it so perfect.
    Thank you for any information on your product of Miyuki beads it will be greatly appreciated.
    Thank you again.

  2. Barbara J Taliaferro

    michaels have some miyuki tila glass beads (5 mm) in their add this week. i can’t get their internet to work so i can’t buy them and i was wondering if you could tell me where else i can buy them. these beads have 2 holes in the side of them. i’m also looking for some pyramid beads with 2 holes in them. the pyramid is on the top side.

Leave a Comment

Your email address will not be published. Required fields are marked *


Shopping Cart
Select your currency
USD United States (US) dollar
EUR Euro